Dear comrades,
I was trying to find without success the nAxisGeneratorPos component for orocos 2 that can be found in orocos 1.0 but without success.
Can anyone give me a clue about that: am I missing something, like a repository where to download it, or I have to install it from the motion_control files from the orocos 1?
Thanks in advance!
Josep
nAxisGenetor Pos in orocos 2 ?
On Feb 25, 2011, at 15:37 , Josep Arnau Claret Robert wrote:
> Dear comrades,
>
> I was trying to find without success the nAxisGeneratorPos component for orocos 2 that can be found in orocos 1.0 but without success.
>
> Can anyone give me a clue about that: am I missing something, like a repository where to download it, or I have to install it from the motion_control files from the orocos 1?
>
> Thanks in advance!
Unfortunately, it was removed in the transition from v1 to v2.
With the push towards user contributed components again, I'd suggest we add this and its cartesian cousin back. They are worthwhile and useful examples.
S
nAxisGenetor Pos in orocos 2 ?
On 02/25/2011 10:16 PM, S Roderick wrote:
> On Feb 25, 2011, at 15:37 , Josep Arnau Claret Robert wrote:
>
>> Dear comrades,
>>
>> I was trying to find without success the nAxisGeneratorPos component
>> for orocos 2 that can be found in orocos 1.0 but without success.
>>
>> Can anyone give me a clue about that: am I missing something, like a
>> repository where to download it, or I have to install it from the
>> motion_control files from the orocos 1?
>>
>> Thanks in advance!
>
> Unfortunately, it was removed in the transition from v1 to v2.
>
> With the push towards user contributed components again, I'd suggest we
> add this and its cartesian cousin back. They are worthwhile and useful
> examples.
> S
>
I upgraded some of the ocl components (not this one yet) with the
conversion scripts on:
http://www.orocos.org/wiki/rtt/rtt-20/rtt-20-renaming-table
It worked for most of them 'out of the box'.
Nick
nAxisGenetor Pos in orocos 2 ?
A Dilluns, 28 de febrer de 2011, Dominick Vanthienen va escriure:
> On 02/25/2011 10:16 PM, S Roderick wrote:
> > On Feb 25, 2011, at 15:37 , Josep Arnau Claret Robert wrote:
> >> Dear comrades,
> >>
> >> I was trying to find without success the nAxisGeneratorPos component
> >> for orocos 2 that can be found in orocos 1.0 but without success.
> >>
> >> Can anyone give me a clue about that: am I missing something, like a
> >> repository where to download it, or I have to install it from the
> >> motion_control files from the orocos 1?
> >>
> >> Thanks in advance!
> >
> > Unfortunately, it was removed in the transition from v1 to v2.
> >
> > With the push towards user contributed components again, I'd suggest we
> > add this and its cartesian cousin back. They are worthwhile and useful
> > examples.
> > S
>
> I upgraded some of the ocl components (not this one yet) with the
> conversion scripts on:
> http://www.orocos.org/wiki/rtt/rtt-20/rtt-20-renaming-table
> It worked for most of them 'out of the box'.
>
but you didn't "push" it to master, no?
nAxisGenetor Pos in orocos 2 ?
On Monday 28 February 2011 11:04:20 Leopold Palomo-Avellaneda wrote:
> A Dilluns, 28 de febrer de 2011, Dominick Vanthienen va escriure:
> > On 02/25/2011 10:16 PM, S Roderick wrote:
> > > On Feb 25, 2011, at 15:37 , Josep Arnau Claret Robert wrote:
> > >> Dear comrades,
> > >>
> > >> I was trying to find without success the nAxisGeneratorPos
> > >> component
> > >> for orocos 2 that can be found in orocos 1.0 but without success.
> > >>
> > >> Can anyone give me a clue about that: am I missing something, like
> > >> a
> > >> repository where to download it, or I have to install it from the
> > >> motion_control files from the orocos 1?
> > >>
> > >> Thanks in advance!
> > >
> > > Unfortunately, it was removed in the transition from v1 to v2.
> > >
> > > With the push towards user contributed components again, I'd suggest
> > > we
> > > add this and its cartesian cousin back. They are worthwhile and
> > > useful
> > > examples.
> > > S
> >
> > I upgraded some of the ocl components (not this one yet) with the
> > conversion scripts on:
> > http://www.orocos.org/wiki/rtt/rtt-20/rtt-20-renaming-table
> > It worked for most of them 'out of the box'.
>
> but you didn't "push" it to master, no?
No, because after some discussion it was agreed that they do not belong to OCL
anymore but in their own repository somewhere else.
-- Ruben
nAxisGenetor Pos in orocos 2 ?
A Dilluns, 28 de febrer de 2011, Ruben Smits va escriure:
> On Monday 28 February 2011 11:04:20 Leopold Palomo-Avellaneda wrote:
> > A Dilluns, 28 de febrer de 2011, Dominick Vanthienen va escriure:
> > > On 02/25/2011 10:16 PM, S Roderick wrote:
> > > > On Feb 25, 2011, at 15:37 , Josep Arnau Claret Robert wrote:
> > > >> Dear comrades,
> > > >>
> > > >> I was trying to find without success the nAxisGeneratorPos
> > > >> component
> > > >> for orocos 2 that can be found in orocos 1.0 but without success.
> > > >>
> > > >> Can anyone give me a clue about that: am I missing something, like
> > > >> a
> > > >> repository where to download it, or I have to install it from the
> > > >> motion_control files from the orocos 1?
> > > >>
> > > >> Thanks in advance!
> > > >
> > > > Unfortunately, it was removed in the transition from v1 to v2.
> > > >
> > > > With the push towards user contributed components again, I'd suggest
> > > > we
> > > > add this and its cartesian cousin back. They are worthwhile and
> > > > useful
> > > > examples.
> > > > S
> > >
> > > I upgraded some of the ocl components (not this one yet) with the
> > > conversion scripts on:
> > > http://www.orocos.org/wiki/rtt/rtt-20/rtt-20-renaming-table
> > > It worked for most of them 'out of the box'.
> >
> > but you didn't "push" it to master, no?
>
> No, because after some discussion it was agreed that they do not belong to
> OCL anymore but in their own repository somewhere else.
private, I understand.
Ok.
nAxisGenetor Pos in orocos 2 ?
2011/2/28 Ruben Smits <ruben [dot] smits [..] ...>
> On Monday 28 February 2011 11:04:20 Leopold Palomo-Avellaneda wrote:
> > A Dilluns, 28 de febrer de 2011, Dominick Vanthienen va escriure:
> > > On 02/25/2011 10:16 PM, S Roderick wrote:
> > > > On Feb 25, 2011, at 15:37 , Josep Arnau Claret Robert wrote:
> > > >> Dear comrades,
> > > >>
> > > >> I was trying to find without success the nAxisGeneratorPos
> > > >> component
> > > >> for orocos 2 that can be found in orocos 1.0 but without success.
> > > >>
> > > >> Can anyone give me a clue about that: am I missing something, like
> > > >> a
> > > >> repository where to download it, or I have to install it from the
> > > >> motion_control files from the orocos 1?
> > > >>
> > > >> Thanks in advance!
> > > >
> > > > Unfortunately, it was removed in the transition from v1 to v2.
> > > >
> > > > With the push towards user contributed components again, I'd suggest
> > > > we
> > > > add this and its cartesian cousin back. They are worthwhile and
> > > > useful
> > > > examples.
> > > > S
> > >
> > > I upgraded some of the ocl components (not this one yet) with the
> > > conversion scripts on:
> > > http://www.orocos.org/wiki/rtt/rtt-20/rtt-20-renaming-table
> > > It worked for most of them 'out of the box'.
> >
> > but you didn't "push" it to master, no?
>
> No, because after some discussion it was agreed that they do not belong to
> OCL
> anymore but in their own repository somewhere else.
>
>
The somewhere else is a current discussion. If you have idea please feed the
discussion
> -- Ruben
> --
> Orocos-Dev mailing list
> Orocos-Dev [..] ...
> http://lists.mech.kuleuven.be/mailman/listinfo/orocos-dev
>