- European Robotics Forum 2011 Workshop on the Orocos Toolchain
- European Robotics Forum 2012: workshops
- Geometric relations semantics
- KDL wiki
- Kuka LBR user group
- Links of Orocos components
- OCL wiki
- RTT wiki
- Wiki for site admins
- iTaSC wiki
Roadmap ideas for 3.x
While the project is still in the (heavy?) turmoil of the 1.x-to-2.x transition, it might be useful to start thinking about the next version, 3.x. Below are a number of developments and policies that could eventually become 3.x; please, use the project's (user and developer) mailinglists to give your opinions, using a 3.x Roadmap message tag.
Disclaimer: there is nothing official yet about any of the below-mentioned suggestions; on the contrary, they are currently just the reflections of one single person, Herman Bruyninckx. (Please, update this disclaimer if you add your own suggestions.)
General policies to be followed in this Roadmap:
- the anti-Not Invented Here policy: whenever there exists a FOSS project that has already a solution for (part of) this roadmap, we should try to cooperate with that project, instead of putting efforts in our own version.
- the big critical mass projects first policy: when being confronted with the situation above, it is much preferred to cooperate with (contribute to) projects that have a high critical mass (Cmake, Linux, Eclipse, Qt, etc.) instead of with single-person or single-team projects, even when the latter currently have better functionalities and ideas. At the same time, promising single-person projects will be stimulated to make their efforts useful in a larger critical mass project.
Orocos distributionMuch can be improved to bring Orocos closer to users, and the concept of a simple-to-install distribution is a proven best practice. However, Orocos should not try to develop its own distribution, but should rather hook on to existing, successful efforts. ROS is the obvious first choice, and the orocos_toolchain_ros is the concrete initiative that has already started in this direction. However, this "only" makes "some" relevant low-level Orocos functionality available in a form that is easier to install for many robotics users; in order to allow users to profit from all Orocos functionality, the following extra steps have to be set:
- a "Hello Robot!" application, installable as a ROS stack. It could contain a simulated robot, visualised in Morse or Gazebo, and componentized in an RTT component, together with an RTT/KDL/BFL-based set of motion controllers and estimators. (Morse is currently the most promising candidate, from a component-based development point of view.)
- a (Wiki) book that explains the whole setup, not just from a software point of view, but also a motivation why the presented example could be considered as a "best practice" as a robotics system. This Wiki book should not be an Orocos-only effort, but be useful for the whole community.
- a similar "Hello Machine!" application, targeting not the robotics community, but the mechatronics, or machine tools community.
Contributors to this part of the Roadmap need not be RTT developers, but motivated users!
RTTThe road towards better decoupling, as started in 2.x, is designed and implemented further:
- RTT will get a complete and explicit component model, existing of component, composite component, connection, port, interface, discrete behaviour, and communication:
- The OROMACS development at the University of Twente have already produced a core of the composite component. That concept is required for a full support of the Model-Driven Engineering approach.
- the connection is the data-less, event-less and command-less representation of the architecture of a system, consisting of only the identification of which components will interact with each other.
- the difference between a port and an interface is that a port belongs to a component, and implements an interface; the interface in itself must become a first-class citizen of the component model.
- discrete behaviour is the current state machine. Further developments in this context are probably only to be expected at the implementation and tooling front.
- communication: Orocos has had, from day one, the ambition to not provide communication middleware, since there are so many other projects that do that. RTT should, however, improve its decoupling of (i) using data structures inside a component, (ii) providing them for communication in a port, and (iii) transporting them from one component's port to another component's port. Maybe this is as easy as cleanly separating the configuration files for all three aspects; maybe it's more involved than that.
- the mapping on real hardware resources (computational thread, communication field bus) is separated from the definition of a component.
- the process of defining data flow data structures is supported by an IDL language. This IDL has to be chosen together with other projects, and should not be an Orocos-only effort. A real IDL includes the definition of the meaning of the fields in the data, and not just their computer language representation.
- the codel idea of GenoM3 is supported for the construction of continuous behaviour inside a component. The important role of the codel idea in the context of realtime systems is that one should give the component designer full control over when which computations are to be executed (instead of relying on the OS scheduler); this requires a design in which computations can be subdivided in pre-emptible pieces (codels), and in which they can be scheduled in efficient Directed Acyclic Graphs.
Contributors to this part of the Roadmap need be RTT developers!
BFL, KDL, SCLSCL does not yet exist, but there is a high and natural need for a Systems and Control Library, next to BFL and KDL.
All three libraries share a common fundamental design property, and that is that they can all be considered as special cases of executable graphs, so a common support will be developed for the flexible, configurable scheduling off all computations (codels) in complex networks (Bayesian networks, kinematic/dynamic networks, control diagrams).
Contributors to this part of the Roadmap need not be RTT developers, but domain experts that have become power users of the RTT infrastructure!
iTaSC and beyondA usable robotics control systems consists, of course, not only of RTT, BFL, KDL and/or SCL components, but there is an obvious need for a task primitive: the brain that contains all the knowledge about when to use which component, with what configuration, and until what conditions are being satisfied.
As a first step, the instantaneous version of a constrained-based optimization approach to task-level control will be provided. Following steps will extend the instantaneous idea towards non-instantaneous tasks. This extension must be focused on tasks that require realtime performance, since non-realtime solutions are provided by other projects, such as ROS.
Contributors to this part of the Roadmap need not be RTT developers, but domain experts that also happen to be average users of the RTT infrastructure! They will open up the functionalities of Orocos to the normal end-user.
ToolingMore and improved tools have been a major feature of the 2.x evolution. The major tooling effort for 3.x, will be to bring the above-mentioned component model into the Eclipse eco-system.
The first efforts in this direction have started, in the context of the European project BRICS.
Contributors to this part of the Roadmap need not be RTT developers, but programmers familiar with the advanced Eclipse features, such as ecore models, EMG, etc.